TACTIC VANS PINS AND MAGNETS TO HOLD MAX TRAX MK2 (MAXXTRAC NOT INCLUDED)

Description

SEE OTHER LISITNG FOR MAXXTRACC BOARDS

Our iconic magnetic supports for the classic Max Trax MK2 got better and more accessible.

Four (4) rubberized magnets, each with 50 kg (110 lbs) of force, for a total of 200 kg, 440 lbs of force.

Diameter of the magnets: 90mm (3.54 inch), height of the product 95mm (3.74 inches), 260 gr (0.51 lbs).

Those magnets and pins are made for Max Trax MK2 and XTREME, each set of pins holds one pair (2 boards), some clients have changed the internal bolt to be longer in order to fit with other brands of recovery boards, but we do not recomend this as we haven’t tested this method.

Made of PET with CARBON inserts, these pins are now shorter than the genuine Max Trax pins, this means that the recovery boards are sitting closer to the body of your vehicle, and this is not only far more aesthetically pleasing but also brings tangible advantages such as an increased usable strength of the magnets because there is less leverage forcing on them!

These are designed, produced, and hand-assembled in Switzerland.

Please note that also if almost non-perceivable, the plastic part of the pins is 3D printed, with the most expensive materials at 100 euros per kg of plastic. This material is plastic reinforced with carbon fiber, making the pins extremely durable and resistant to heat and impact.